2022 Edwards Equipment Dyna Scat SP6900

2022 Edwards Equipment Dyna Scat SP6900

Swipe to View More

  • Year 2022
  • Make Edwards Equipment
  • Model Dyna Scat
  • Engine V2203-M
2022 Edwards Equipment Dyna Scat SP6900

2022 Edwards Equipment Dyna Scat SP6900

2022 Edwards Equipment Dyna Scat SP6900

Put the Edwards Dyna-Scat on your job and you will discover the features that make it an outstanding forklift. It is designed for use in all kinds of agricultural and construction applications. Three wheel drive makes the Dyna-Scat move and steer like a forklift should—smooth and fast. The rear wheel steers through an arc of 180 degrees for easy maneuverability into tight places with a minimum of tire wear. A full twelve inches of ground clearance makes operation in mud and loose ground easy to take in stride with or without a load. Anyone can learn to drive the Dyna-Scat with just a few minutes of instruction.

Operators enjoy the power steering and short turning radius that speeds work in confined areas. The hydrostatic drive means smooth, positive controlled operation with less operator fatigue. Controls are comfortable located and easy to use. They consist of a steering wheel, forward and reverse pedals, hand throttle with foot throttle override, parking brake, and three forklift control levers.

Service brakes are not necessary remove your hands and feet from the controls and the Dyna-Scat automatically stops, providing “fail safe” operation. Try the Dyna-Scat. It may be just the machine you have been looking for.

Engine

Engine V2203-M
Engine Manufacturer KUBOTA industrial
Displacement 2197cc - 134.1 cu. In.
Cylinder Liners 4
Bore 87mm (3.43 in.)
Stroke 92.4mm (3.64 in.)
Engine Torque 48.1 BHP @ 2800rpm
Air Filter Replaceable Dry Element
Cooling Water Cooled
Starter 12 volt

Fuel System

Fuel System Filter: Full flow replaceable cartridge

Drivetrain

Drive System Reductions: 3 qts. | Hydrostatic Three wheel drive: 0-6 MPH | Hydrostatic Two wheel drive: 0-8 MPH | Hydrostatic Filter: 10 micron
Steering Rear Wheel Piviot Arc: 180

Wheels & Tires

Wheels Three wheels: Super traction loader 12 x 16.5 6 ply

Battery

Battery 12 volt, 550 crank perf.

Electric

Alternator 12 volt. 30 amp.
Electrical Ignition: Key Starting Ingnition Switch

Operational

Operating Speed (Forward and Reverse): 8MPH | Lifting Speed: 60 ft./min.
Operating Conditions Lift: Hand Lever | Sideshift: Hand Lever | Forward: Foot Pedal | Reverse: Foot Pedal | Throttle: Hand Set With Foot Pedal Override | Park Brake:Hand lever

Hydraulics

Pump Type Direct engine mounted
Volume 8.8 GMP @ 2400 RPM
Hydraulic Type Filter: 10 micron
Hydraulic Oil Cooler 12 in x 24 in
Oil Filter Full Flow Replaceable Cartridge

Dimensions

Length Less forks: 121"
Overall Width 72"
Height To Top Of Overhead Guard: 85" | Cushion From Ground: 45"
Ground Clearance 12"
Turning Radius 98"
Dimensions Load Center: 24 in. | Drive axle to fork face: 22"
Length Forks: 46"
Width, Working Position Carriage: 36"

Capacities

Fuel Capacity Tank: 11 gal.
Oil capacity Engine: 10 qts.
Cargo Capacity 3500 lbs.
Hydraulic Capacity Fluid: 20 gal.

Weights

Weight, In Running Order 6730 lbs.

Features

Features Instruments: Tachometer | Hour Meter | Oil Pressure Light | Water Tep, Light | Fuel Level Gauge | Glo Plug Indicator

Product Photography