2022 Edwards Equipment Dyna Scat SP6900

Information

2022 Edwards Equipment Dyna Scat SP6900

Put the Edwards Dyna-Scat on your job and you will discover the features that make it an outstanding forklift. It is designed for use in all kinds of agricultural and construction applications. Three wheel drive makes the Dyna-Scat move and steer like a forklift should—smooth and fast. The rear wheel steers through an arc of 180 degrees for easy maneuverability into tight places with a minimum of tire wear. A full twelve inches of ground clearance makes operation in mud and loose ground easy to take in stride with or without a load. Anyone can learn to drive the Dyna-Scat with just a few minutes of instruction.

Operators enjoy the power steering and short turning radius that speeds work in confined areas. The hydrostatic drive means smooth, positive controlled operation with less operator fatigue. Controls are comfortable located and easy to use. They consist of a steering wheel, forward and reverse pedals, hand throttle with foot throttle override, parking brake, and three forklift control levers.

Service brakes are not necessary remove your hands and feet from the controls and the Dyna-Scat automatically stops, providing “fail safe” operation. Try the Dyna-Scat. It may be just the machine you have been looking for.

Photos

Highlights

  • Yakima, Washington
  • 2022
  • Edwards Equipment
  • Dyna Scat SP6900
  • V2203-M
  • Available
  • To Top Of Overhead Guard: 85" | Cushion From Ground: 45"

Specifications

  • 2022
  • Edwards Equipment
  • Dyna Scat
  • SP6900
  • Pallet Forks
  • V2203-M
  • KUBOTA industrial
  • 2197cc - 134.1 cu. In.
  • 4
  • 87mm (3.43 in.)
  • 92.4mm (3.64 in.)
  • 48.1 BHP @ 2800rpm
  • Replaceable Dry Element
  • Water Cooled
  • 12 volt
  • Filter: Full flow replaceable cartridge
  • Reductions: 3 qts. | Hydrostatic Three wheel drive: 0-6 MPH | Hydrostatic Two wheel drive: 0-8 MPH | Hydrostatic Filter: 10 micron
  • Rear Wheel Piviot Arc: 180
  • Three wheels: Super traction loader 12 x 16.5 6 ply
  • 12 volt, 550 crank perf.
  • 12 volt. 30 amp.
  • Ignition: Key Starting Ingnition Switch
  • (Forward and Reverse): 8MPH | Lifting Speed: 60 ft./min.
  • Lift: Hand Lever | Sideshift: Hand Lever | Forward: Foot Pedal | Reverse: Foot Pedal | Throttle: Hand Set With Foot Pedal Override | Park Brake:Hand lever
  • Direct engine mounted
  • 8.8 GMP @ 2400 RPM
  • Filter: 10 micron
  • 12 in x 24 in
  • Full Flow Replaceable Cartridge
  • Load Center: 24 in. | Drive axle to fork face: 22"
  • Forks: 46"
  • 72"
  • To Top Of Overhead Guard: 85" | Cushion From Ground: 45"
  • 12"
  • 98"
  • Carriage: 36"
  • Tank: 11 gal.
  • Engine: 10 qts.
  • 3500 lbs.
  • Fluid: 20 gal.
  • 6730 lbs.
  • Instruments: Tachometer | Hour Meter | Oil Pressure Light | Water Tep, Light | Fuel Level Gauge | Glo Plug Indicator